+
16 wall panels - 4 nest and fit into a 3'x9'x6" corrugated cardboard
box = 4 boxes.
+
16 roof panels - 4 nest and fit into a 3'x9'x6" corrugated cardboard
box = 4 boxes.
Each
EZup Hut Kit is packed and shipped in = 8 boxes.
(Two
weak people can lift each box comfortably. 4 boxes can be easily transported
on a wheelbarrow - 2 wheelbarrows will move the whole 8
box EZup Hut Kit.)
Included
in each Kit:
+
14 pre-drilled plexiglas windows.
+
2 simple spanners.
+
2 ratchet spanners.
+
2 simple 5 ft. aluminum ladders - when slotted together = 10 ft. ladder.
+
(This ladder supports the roof panel peaks at 10 ft. during assembly).
+
250 galvanized bolts - 1.25" long - 1/4" diameter - with lock-nuts
and neoprene washers.
+
2 doors with simple hinging hardware that bolts to wall panel flanges.
+
3 ft. basic bubble (spirit) level to help level ground prior to Hut assembly.
+
14" peak eye-bolt, with flange caps, wax seal, compression nuts and metal
flag.
+ (Flag? Yes, a 16" long aluminum flag slips onto the 14" peak bolt.
Identifying flag colours turn 'huts' into 'castles' for proud occupants.)
+
"Pict-o-gram" assembly drawings that even a child can follow.
+
Site preparation drawings showing how to level ground, sculpt surroundings
to provide drainage for surface ground water.
+
Drawings showing how to build a 3" mud floor inside the assembled EZup
Hut.
+
Drawings showing how to anchor the EZup Hut to rock pits - by extending 'U'
caps into gound holes filled with rocks on 'U' cap end bent to 90 degrees.
+
Drawings showing solid fuel burning heater/stove with fresh air intake to
combustion chamber and chimney vented through aluminum panel replacing a window
panel.
+
Drawings showing sink and water tub stand, with P-trap drainage to outside
rock pit.
